|
| |
Technical
Bulletin |
#9-A |
Alternate Instructions
|
| Using 30-Gallon
Size Water PreserverTM for 20 Gallon Drums
If desired, a 30-Gallon size bottle of Water Preserver TM may be used to treat a full
20-gallon drum, without measuring drops, by following the directions included with product
for 30-gallon containers. That is, use one 30-gallon size bottle for each 20-gallon drum.
IMPORTANT
FOLLOW THE STANDARD FILLING PROCEDURES, PRECAUTIONS, AND CONTAINER
SPECIFICATION GUIDELINES INCLUDED IN PACKAGE.
NOTE: When re-filling water drums after a period of storage: Inspect drums and check
that drums are clean and free of algae or residue (disinfect if necessary). Check that all
bungs and gaskets are in good condition, and replace if necessary, before sealing tightly
with a bung wrench.
Using 30-Gallon Size Water PreserverTM for 55 Gallon Drums
If desired, two 30-Gallon size bottles of Water PreserverTM may be
used to treat ONE full 55-gallon drum, as follows:
1. Without measuring drops, empty two full 30-gallon size bottles of Water PreserverTM
into each 55-gallon drum.
-- OR --
2. Follow the "drops per gallon"
directions included with product. That is, use 8 drops per gallon: (8 x 55 = 440 drops
per 55-gallon drum). This method requires using drops from two or more 30-gallon
bottles.
IMPORTANT
FOLLOW THE STANDARD FILLING PROCEDURES, PRECAUTIONS, AND CONTAINER
SPECIFICATION GUIDELINES INCLUDED IN PACKAGE.
NOTE: When re-filling water drums after a period of storage: Inspect drums and check
that drums are clean and free of residue (disinfect if necessary). Check that all bungs
and gaskets are in good condition, and replace if necessary, before sealing tightly with a
bung wrench. |
|
